config.arm64_v8a

config.xxxhdpi

config.en

Everyone

BlackFlame Media.

Nougat

We present to you an internal and external Speaker tester for audio test and frequency generation. You can use this to test the quality and perform an audio test of speakers while buying new speakers, or can use to conduct an audio test on your phone's ear piece and loud speaker. speaker tester is a very simple frequency generator which generates different frequencies and performs a sound test and audio test on your speakers.
It generates a simple sine wave frequencies which will let you test the quality of any kind of speakers, internal or external.
you can also conduct a sound test on your speakers automatically. it is a signal generator which can be used to generate sine wave signal.
Speaker tester automatic mode allows you to perform testing on your speaker on preset frequencies.
If you want to play high quality games or music and are confused if your phone can deliver the high fidelity sound quality for the games or music, just do a testing using speaker tester gives the rating for your speakers on a 1-5 star scale.
Speaker tester also boost your speakers performance by clearing the audio memory.

How To Use:-
This app provides two modes of speaker testing and audio testing. Manual Testing and Automatic Testing

Manual Testing:- 
To perform manual audio test/testing just click on "Play Button" and slide the frequency bar to your desired frequency. If the speaker is able to play high frequencies up to 5000 Hz and low frequencies up to 200 Hz then the quality of speaker is good. There are multiple setting options available for manual testing in setting menu such as buffer size, sample playback rate.

Automatic Testing:-
To perform Automatic audio test/testing of phone's speaker or music system, Connect the music system to phone with volume of 50% and Just tap on "Check speaker quality automatically" Button. The app will then check the quality of your phones speaker or music system automatically and display the result below in form of rating.
THE RESULTS MAY VARY ACCORDING TO THE LOCATION AND BACKGROUND NOISE. TO GET ACCURATE RESULTS PLEASE TEST THE SPEAKER IN AS MUCH SILENT ENVIRONMENT AS POSSIBLE.
WARNING!
PLAYING HIGH FREQUENCY SOUNDS AT HIGH VOLUME CAN DAMAGE YOUR EARS AS WELL AS SPEAKERS. WE ARE NOT RESPONSIBLE FOR ANY KIND OF DAMAGE CAUSED TO YOU, SPEAKER OR PEOPLE AROUND YOU, CAUSED BY PLAYING HIGH FREQUENCY SOUNDS AT HIGH VOLUME OR INCORRECT SETTINGS . PLEASE READ THE "How To Use" SECTION BELOW BEFORE USING
我们为您提供内部和外部扬声器测试仪，用于音频测试和频率生成。您可以使用它来测试音质并在购买新扬声器时对扬声器进行音频测试，或者可以用来对手机的耳机和扬声器进行音频测试。扬声器测试仪是一个非常简单的频率发生器，可以产生不同的频率，并在扬声器上进行声音测试和音频测试。
它可以生成简单的正弦波频率，让您可以测试任何类型的内部或外部扬声器的质量。
您还可以自动对扬声器进行声音测试。它是一个信号发生器，可用于产生正弦波信号。
扬声器测试仪自动模式允许您在预设频率上对扬声器进行测试。
如果您想要播放高质量的游戏或音乐并且如果您的手机能够为游戏或音乐提供高保真音质而感到困惑，那么只需使用扬声器测试仪进行测试即可为您的扬声器提供1-5星级的评级。
扬声器测试仪还可通过清除音频存储器来提高扬声器性能。

如何使用：-
此应用程序提供两种扬声器测试和音频测试模式。手动测试和自动测试

手动测试： - 
要执行手动音频测试/测试，只需单击“播放按钮”并将频率条滑动到所需频率。如果扬声器能够播放高达5000 Hz的高频和低至200 Hz的低频，那么扬声器的质量就很好。在设置菜单中有多种设置选项可用于手动测试，例如缓冲区大小，采样播放速率。

 自动测试： - 
要对手机的扬声器或音乐系统进行自动音频测试/测试，请将音乐系统连接到音量为50％的手机，然后点击“自动检查扬声器质量”按钮。然后，应用程序将自动检查您的手机扬声器或音乐系统的质量，并以评级的形式显示以下结果。
结果可能因地点和背景噪音而变化。要获得准确的结果，请在尽可能多的沉默环境中测试扬声器。
警告！
在高音量下播放高频声音可能会损害您的耳朵和声音。对于因您在高音量或不正确的设置下播放高频声音而引起的任何损害，我们对您，扬声器或人员造成的任何损害不承担任何责任。请在使用前阅读以下“如何使用”部分


自动扬声器和音频测试应用程序，频率发生器。扬声器测试仪

Speaker Tester

Speaker Tester的最新版本

其他版本